Other manufacturing industries
The National Development Plan (PND) 2021-2025 aims to establish the manufacturing industry as the backbone of the structural transformation of the economy. The strategic objectives tied to this ambition are balanced development among regions through the implementation of industrial clusters, increased competitiveness of manufacturing industries, and the intensification of external trade.
To achieve these objectives, the Government has implemented actions and other reforms to improve the governance, productivity and competitiveness of the manufacturing sub-sector through:
the development and implementation of a strategic plan to revive struggling companies (textile sector);
the creation of an area dedicated to the cement sector covering 59 ha, as part of the development of a 234 ha plot (Phase 1) in the Akoupé-Zeudji PK24 industrial zone by Soroubat;
the development of 127 ha under MOP (public project ownership) by the operator CHEC in the Akoupé-Zeudji PK24 industrial zone;
the improvement of quality and the fight against counterfeiting;
the reservation of the entire seed production for oilseed crushers for the 2022-2023 and 2023-2024 seasons, owing to the low production of seed cotton and the high installed crushing capacity;
the completion of strategic studies on the seven (7) clusters, with the adoption of strategies for the “textile” and “automotive” clusters;
the operationalisation of the Company for the Management and Development of Industrial Infrastructure, known as SOGEDI, in 2023;
the Government's adoption of a strategic framework for the development of industrial zones in 2022.
The industrial policy has identified seven (07) industrial clusters on which industrial development is to be based: agro-industry and six (06) others relating to the other manufacturing industries, namely the pharmaceutical industry; construction materials, furnishing and equipment; the chemical and plastics industries; textiles; vehicle assembly and spare-parts manufacturing; and packaging.
To this end, industrial development relies on a dynamic legal and regulatory framework. Examples include:
the adoption of Law No. 2013-866 of 23 December 2013 on standardisation and the promotion of quality, and its two implementing decrees;
Decree No. 2015-22 of 14 January 2015 on the procedures and conditions for granting land for industrial use;
Decree No. 2016-1152 of 28 December 2016 making certain standards mandatory;
Decree No. 2017-145 of 1 March 2017 setting the conditions for establishing an industrial unit on land located outside an industrial zone;
Law No. 2018-985 of 28 December 2018 establishing the free zone regime;
Ordinance No. 2020-687 of 23 September 2020 legalising the tax and customs regime of the development agreement for the industrial economic zones project in Abidjan, Ferkessédougou and San Pedro;
Decree No. 2022-245 of 30 March 2022 establishing the “Company for the Management and Development of Industrial Infrastructure”, abbreviated SOGEDI;
Decree No. 2022-596 of 3 August 2022 adjusting the amount of the industrial fee in the industrial zones of Bonoua and Grand-Bassam;
the Law of 12 June 2024 laying down the rules applicable to industrial zones and to land intended for industrial activity;
the Decree of 10 July 2024 extending the adjusted payment arrangements for the industrial land occupancy fee for manufacturers processing logs.
From an institutional standpoint, the State relies on entities such as the Company for the Management and Development of Industrial Infrastructure (SOGEDI), the Ivorian Intellectual Property Office (OIPI), Côte d’Ivoire Normalisation (CODINORM), Côte d’Ivoire Engineering, the Technology Demonstration and Promotion Centre (CDT), the Ivorian Tropical Technology Company (I2T) and the National Laboratory for Quality Testing, Metrology and Analysis (LANEMA).
Main strategic indicators of the Industry sector
| Key indicators | Baseline | Target | ||
Year | Value | 2023 | 2025 | |
| Share of the industrial sector in GDP / PIB | 2019 | 21,2% | 24% | 28% |
| Rehabilitation rate of the industrial zones to be rehabilitated | 2020 | 20% | 50% | 100% |
| Global Competitiveness Index (IGC/GCI) of the World Economic Forum | 2019 | 48,1 | 60 | 70 |
| GCI global rank | 2019 | 118th | 75th | 55th |
| Number of industrial zones developed | 2020 | 04 | 08 | 10 |
| Number of industrial zones rehabilitated | 2020 | 01 | 03 | 05 |
| Satisfaction rate of industrial land requests | 2020 | 45% | 80% | 90% |
Sources : PND 2021-2025
Industry recorded average annual growth of 9.8% over the period 2015-2024. As for the sector's value added, it rose from CFA francs (FCFA) 4,230.7 billion in 2015 to FCFA 9,770.2 billion in 2024. Finally, the share of the industrial sector in GDP rose from 15.6% in 2015 to 18.5% in 2024.
Sources : MEPD/DGE, MCI
Investment in the industry sector
Over the period 2019-2024, investment made in the industrial sector totalled FCFA 1,694.03 billion, broken down as follows:
FCFA 69.59 billion in 2019;
FCFA 68.48 billion in 2020;
FCFA 156.4 billion in 2021;
FCFA 457.45 billion in 2022;
FCFA 521.98 billion in 2023;
FCFA 420.13 billion in 2024.
Thus, the amount of investment in the industrial sector is down 19.5% compared with 2023.
This investment made it possible to create a total of 242 companies and 12,732 direct jobs, broken down as follows:
21 companies for 1,520 jobs created in 2019;
09 companies for 394 jobs created in 2020;
28 companies for 3,116 jobs generated in 2021;
75 companies for 4,452 jobs in 2022;
54 companies for 1,544 jobs in 2023;
55 companies for 1,706 jobs in 2024.
Investment in the industrial sector
| Item | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 |
| Amount of approved investment (in billions FCFA | 69,59 | 68,48 | 156,40 | 457,45 | 521,98 | 420,13 |
| Number of approved industrial companies | 21 | 09 | 28 | 75 | 54 | 55 |
| Number of jobs generated | 1 520 | 394 | 3 116 | 4 452 | 1 544 | 1 706 |
Sources : MCI/Directorate General of Industry
The number of industrial companies
The pre-identification for the 2019 census (RGEIE-CI) carried out by ANStat shows that Ivorian industry has more than 8,500 formal and informal companies. Manufacturing industry (including agri-food) accounts for 72.4% of the secondary sector, with the agri-food and tobacco industry (32.1%); the textile and leather industries (2.4%); the wood and furniture industry (14.9%); the paper, cardboard, publishing and printing industry (3.3%); the petroleum, chemical, rubber and plastics industries (15.1%); the metal industries (0.3%); and the manufacture of machinery and equipment of all types (4.3%).
The national register of industrial companies of Côte d’Ivoire compiled by ANStat counts 4,951 formal companies in 2022. These companies are distributed as follows: Manufacturing (89.2%), Extractive activities (7.1%), Water production and distribution, sanitation, waste treatment and remediation (3.1%) and electricity and gas production and distribution (0.6%).
Industrial production
In 2024, the volume of industrial output rose sharply (+7.0%) compared with 2023, thanks to the strong performance of the extractive industries (+16.4%), the electricity, gas and water production and distribution industries (+3.7%), the environmental industries (+1.8%) and the manufacturing industries (+2.9%).
The extractive industries benefit from the vitality of the “extraction of metal ores” division (+13.4%), supported by gold production (+16.1%), and the “extraction of hydrocarbons” division (+29.0%), driven by crude oil production (+49.7%) following the start of production at the Baleine field.
The manufacturing and energy sectors, for their part, show a clear improvement, driven by the good performance of “rubber and plastics processing” (+13.0%) and “electricity and gas production and distribution” (+3.4%).
Manufacturing industry (excluding agri-food and petroleum products)
The manufacturing industries (excluding agri-food and petroleum products) recorded average annual growth of 9.8% over the period 2015-2024. Their value added rose from FCFA 1,399.8 billion in 2015 to FCFA 3,274.8 billion in 2024. Their share in the secondary sector rose from 25.7% in 2015 to 27.4% in 2024.
Automotive assembly sector
The assembly sector remains embryonic, with sixty-two (62) companies operating mainly in the assembly of non-electrical machinery and equipment. In addition, projects to set up new-vehicle assembly units are developing. In 2022, the IVECO Group, in partnership with the Société des Transports Abidjanais (SOTRA), inaugurated a vehicle assembly unit called “Daily Ivoire”. In 2023, a partnership agreement between the Government and the “Ashok Leyland” group was signed to set up an assembly line for more than 1,700 vehicles of 05 different types.
In addition, a white paper on the competitive ecosystem for the development of the automotive assembly sector was adopted by the Government on 20 December 2023.
In 2025, an action plan to implement the strategy was launched, covering the Côte d’Ivoire automotive programme, abbreviated “PACI”.
Chemicals sector
Products from this sector fall into various categories of intermediate goods and consumer goods. They are intended for the local market as well as for export. They are more specifically agrochemical products (fertilisers and pesticides), cosmetic products (perfumes and creams), wet rubber processing, and plastic products (shoes, chairs, tables, etc.). In most cases, the raw materials used are imported.
The main companies are HYJAZI, SIPPEC, AF-CHEMSOFACO, CALLIVOIRE, POLYCHIMIE, STEPC, GHANDOUR, 2CI, NAJIBCO, SAI, COPACI, AFRICHIM, SADOFOSS, SAPROCHIM, THEMIS ET SOCIDA.
Natural rubber processing
The Government's objective is to consolidate the gains and begin a new phase of development of the sector. To that end, the aim is to ensure the first processing of the entire natural rubber output in the short term and to achieve second processing, in order to generate more value added.
The total capacity of the 1st processing stage stands at 1,800,000 tonnes of dry rubber per year in 2024, compared with 1,372,800 tonnes in 2023. There are 47 operational processing units.
Forty-six (46) projects to build new plants or expand existing capacity are under way. Thus, by 2027, they should raise the potential production of technically specified rubber to 3,194,000 tonnes per year.
The rate of the 1st stage of processing dry rubber into granulated rubber is 92.7% in 2024, compared with 79.3% in 2023. The rate of the 2nd stage of processing is 2%.
Installed capacity and rubber processing
| Items | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 |
| Dry rubber production (tonnes) | 453 040 | 606 420 | 624 139 | 780 051 | 955 571 | 1 100 386 | 1 320 076 | 1 624 824 | 1 686 599 |
| Installed capacity (tonnes of dry latex/year) | 595 120 | 678 700 | 704 000 | 739 200 | 1 160 740 | 1 372 800 | 1 372 800 | 1 372 800 | 1 800 000 |
| Quantity processed (tonnes of granulated rubber) | 453 040 | 471 002 | 504 852 | 573 222 | 659 741 | 861 206 | 1 053 284 | 1 288 386 | 1 563 396 |
| Processing rate | 100% | 77,67% | 80,89% | 73,49% | 69,04% | 78,26% | 79,79% | 79,29% | 92,70% |
Sources : Rubber and Oil Palm Council
Pharmaceutical industry
Production of the pharmaceutical industry remains low and covers approximately 6% of national demand. The sector has nine (09) local manufacturers, including CIPHARM, which accounts for more than 60% of production. It also has three (03) wholesaler-distributors, which import more than 90% of national demand. This sub-sector, which has been dominated by CIPHARM since 1986, is seeing the arrival of several groups such as “Tridem Pharma” in 2022, with a project to build a medicines production plant at a total cost of FCFA 56 billion, the establishment of the Chinese group Fosun Pharma (with 02 pharmaceutical production lines in prospect) and SAIPH (Société arabe des industries pharmaceutiques), whose plant is scheduled to be completed by the end of December 2025.
Construction materials
- Cement
Strong growth in cement production has been recorded (10.9% on average per year between 2015 and 2023) with the arrival of new players such as Dangote Cement CI, Lafarge Holcim CI and CIMAF. In addition, production capacity has been multiplied by six, rising from 3.2 million tonnes in 2015 to 20.45 million tonnes in 2024. The number of industrial units in operation rose from 05 in 2015 to 14 in 2024.
Production reached 7.5 million tonnes in 2024, compared with 3.05 million tonnes in 2015. The number of direct jobs generated in the sector stands at 2,300 in 2022, compared with 1,575 in 2019.
Cement imports are restricted, except by Government derogation (Order No. 0049 of 20 August 1979 on cement import and export procedures).
Cement production capacity and national production from 2015 to 2023
| Year | Production capacity (in millions of tonnes) | Production (in millions of tonnes) |
2015 | 3,2 | 3,05 |
2016 | 3,7 | 3,46 |
2017 | 5,7 | 3,85 |
2018 | 11,7 | 3,9 |
2019 | 12,7 | 4,26 |
2020 | 15,05 | 5,2 |
2021 | 17 | 6 |
2022 | 20 | 6,8 |
2023 | 20 | 7 |
2024 | 20,45 | 7,5 |
Sources : MCI/Directorate General of Industry
- Tiles
National production capacity rose from 840,000 m²/year in 2020 to 22.84 million m²/year in 2024, and is expected to reach 70.8 million m²/year by the end of 2026 thanks to the installation of a new 48 million m²/year production line in Yamoussoukro, thereby strengthening national self-sufficiency in this segment. National consumption stands at 24 million m² in 2024, up 5% compared with 2023.
The main players are Garmi Ceramic Côte d'Ivoire, the Compagnie Ivoirienne de Granit Concasse, Keda Céramics Côte d’Ivoire and Société Sino-Africaine d’Exploitation de Carrières (S.S.E.C) SARL.
Change in the production capacity of industrial tile manufacturing units
| Year | 2020 | 2021 | 2022 | 2023 | 2024 |
| Installed production capacity (m²/year) | 840 000 | 11 840 000 | 11 840 000 | 11 840 000 | 22 840 000 |
Source : MCI/DGIn
- Scrap metal
As a reminder, the Government adopted a measure suspending exports of scrap metal, ferrous by-products, cast iron, and aluminium waste and scrap by Decree No. 2023-727 of 13 September 2023. The processing of scrap metal in Côte d’Ivoire is carried out by five (5) industrial units, namely:
the Aciéries de Côte d’Ivoire of the Eurofind group (with a capacity of 145,000 tonnes/year),
King Ivoire Sarl, owned by Indian capital (with a capacity of 60,000 tonnes/year),
SOCIFAB, with an installed capacity of 30,000 tonnes/year,
Xin Hao Min Métal, with a capacity of 60,000 tonnes/year.
CIFEAC, owned by Indian capital, with a capacity of 66,000 tonnes/year.
Production capacity rose from 205,000 tonnes/year in 2018 to 361,000 tonnes/year in 2024, an average increase of 9.9% per year.
Scrap metal is processed into metallurgical products intended mainly for construction, such as reinforcing bars, sheet metal, nails and metal sections.
Source : MCI/DGIn
- Ready-to-use reinforcing bars
Manufactured by local steelworks from recycled scrap metal or imported hot-rolled steel coils, ready-to-use reinforcing bar is an important material in the Ivorian construction materials industry. National production capacity has grown exceptionally, from 72,000 tonnes in 2020 to 750,000 tonnes in 2024 (+79.7% on average per year), reflecting a build-up of investment in this sector. National consumption stands at 320,000 tonnes in 2024, up 12.5% compared with 2023.
The main industries in the sector are: Société des Tubes d'Acier et d'Aluminium en Côte d'Ivoire (SOTACI), Universelle Industries (UI), FER Ivoire, Société Ivoirienne de Fabrication de Fer à Béton (SOCIFAB).
Table 6: Change in the production capacity of industrial units manufacturing ready-to-use reinforcing bars
| Year | 2020 | 2021 | 2022 | 2023 | 2024 |
| Installed production capacity (tonnes) | 72 000 | 72 000 | 320 000 | 600 000 | 750 000 |
Source : MCI/DGIn
- Aluminium
The installed capacity of aluminium production units rose from 6,500 tonnes/year in 2018 to 20,000 tonnes/year in 2023 and then to 32,000 tonnes/year in 2024. Aluminium waste recovery units rose from one unit in 2018 to four (04) units in 2024.
- Sheets and roof tiles
Annual production capacity rose from 52.49 million m²/year in 2020 to 80 million m²/year in 2024 (+11.1% on average per year), largely covering local needs and improving resilience to imports. National consumption in 2024 stands at 7 million tonnes, up 14.5% compared with 2023.
Demand is geared towards box-profile sheets, corrugated sheets and tile-effect sheets, often manufactured with a variety of raw materials to meet the needs of the local market. The main manufacturers in the sector are: Universelle Industries (UI), Yedi Industrie, Sotaci and TÔLES Ivoire.
Change in the production capacity of industrial units manufacturing sheets and roof tiles
| Year | 2020 | 2021 | 2022 | 2023 | 2024 |
| Installed production capacity (m²/year) | 52 488 000 | 58 320 000 | 72 000 000 | 72 000 000 | 80 000 000 |
Source : MCI/DGIn
- Paint and filler
National production is diversified, with national brands present on the market. Production capacity rose from 95.13 million litres in 2020 to 140.69 million litres in 2024 (+10.3% on average per year), reflecting a greater diversification of the national offering. National consumption in 2024 stands at 140.81 million litres, up 12.2% compared with 2023.
The main national players are: PPG Côte d'Ivoire, SOCIPED, DROCOLOR and SIPPEC
Change in the production capacity of industrial units manufacturing paint and filler
| Year | 2020 | 2021 | 2022 | 2023 | 2024 |
| Installed production capacity (litres/year) | 95 130 000 | 105 700 000 | 140 686 700 | 140 686 700 | 140 686 700 |
Source : MCI/DGIn
- Plaster and plasterboard
National production began in 2022 with a first unit with a capacity of 400,000 tonnes/year, reaching 3.65 million tonnes in 2024 following the start of operations of two new companies, which significantly reduced imports. National consumption amounts to approximately 400,000 tonnes in 2024.
The main manufacturers in the sector are: SCMS Architecture & Construction, PLÂTRE GAZELLE and DROCOLOR.
Change in the production capacity of industrial units manufacturing plaster and plasterboard
| Year | 2022 | 2023 | 2024 |
| Installed production capacity (tonnes/year) | 400 000 | 400 000 | 3 648 000 |
Source : MCI/DGIn
- PVC / Pipes
National production capacity rose from 25,000 tonnes in 2020 to 38,000 tonnes in 2024, an increase of 11.0% on average per year. National consumption amounts to approximately 74,500 tonnes in 2024, up 10.2% compared with 2023.
The main manufacturers in the sector are: SOTICI (Société de Transformation Industrielle en Côte d'Ivoire) and NOVAPLAST-CI.
Change in the production capacity of industrial units manufacturing PVC / pipes
| Year | 2020 | 2021 | 2022 | 2023 | 2024 |
| Installed production capacity (tonnes/year) | 25 000 | 27 700 | 27 700 | 34 200 | 38 000 |
Source : MCI/DGIn
Processing of cotton into textiles and clothing
The Government's objective is to raise the cotton processing rate to 70% by 2025 (with 100% processing for seed cotton and 40% for cotton fibre), compared with 26.75% in 2020 (42% for seed cotton and 11.49% for cotton fibre). To this end, the sector needs to be made more attractive and more competitive across the whole value chain, in order to create many jobs, particularly for young people and women. To that effect, a strategy to revive the sector was adopted by the Government in 2023.
The cotton-textile and clothing sector comprises agricultural production of seed cotton, ginning, spinning/weaving, finishing, oilseed crushing and garment making.
Ginning activity is carried out by six (6) cotton or ginning companies located mainly in the centre and north of the country, with thirteen (13) operational units with a total capacity of 655,000 tonnes per year. They are: the company IVOIRE COTON with 4 units, the Compagnie Ivoirienne de Coton (COIC) with 3 units, the Nouvelle Compagnie Ivoirienne pour le Développement des Textiles (Nouvelle CIDT) with 3 units, the Société d’Exploitation de Coton d’Olam (SECO-OLAM) with one unit, the Société Industrielle Cotonnière des Savanes (SICOSA) with one unit and the company Global Cotton (GLC) with one unit.
For spinning or weaving, the installed capacity of the spinning/weaving units in Côte d’Ivoire is 26,000 tonnes per year. It is held by three (3) companies located in Bouaké, Dimbokro and Agboville. They are: Fillature Tissage de Gonfreville (FTG), UTEXI-CI, which has two (02) plants (Dimbokro and Agboville), and COTIVO.
Two companies operate in textile finishing and are located in Bouaké and Abidjan, with a total capacity of 35 million metres of fabric per year. They are: TEX-CI, located in Bouaké, and UNIWAX, located in Abidjan.
The Ivorian oilseed crushing sector has two modern units, one medium-sized unit and small semi-artisanal cottonseed crushing units, with a total installed capacity of 345,000 tonnes of cottonseed. They are: OLHEOL in Bouaké, COTRAF in Korhogo, HCI (Huilerie de Côte d’Ivoire) in Bouaké and APMUT (Association des Petites et Moyennes Unités de Trituration).
Finally, the garment-making sector is made up mostly of textile and fashion artisans, with more than 50,000 artisans and 15 industrial production units.
Change in the production capacity of industrial units manufacturing PVC / pipes
| Year | 2020 | 2021 | 2022 | 2023 | 2024 |
| Installed production capacity (tonnes/year) | 25 000 | 27 700 | 27 700 | 34 200 | 38 000 |
- Processing of cotton into textiles and clothing
The Government's objective is to raise the cotton processing rate to 70% by 2025 (with 100% processing for seed cotton and 40% for cotton fibre), compared with 26.75% in 2020 (42% for seed cotton and 11.49% for cotton fibre). To this end, the sector needs to be made more attractive and more competitive across the whole value chain, in order to create many jobs, particularly for young people and women. To that effect, a strategy to revive the sector was adopted by the Government in 2023.
The cotton-textile and clothing sector comprises agricultural production of seed cotton, ginning, spinning/weaving, finishing, oilseed crushing and garment making.
Ginning activity is carried out by six (6) cotton or ginning companies located mainly in the centre and north of the country, with thirteen (13) operational units with a total capacity of 655,000 tonnes per year. They are: the company IVOIRE COTON with 4 units, the Compagnie Ivoirienne de Coton (COIC) with 3 units, the Nouvelle Compagnie Ivoirienne pour le Développement des Textiles (Nouvelle CIDT) with 3 units, the Société d’Exploitation de Coton d’Olam (SECO-OLAM) with one unit, the Société Industrielle Cotonnière des Savanes (SICOSA) with one unit and the company Global Cotton (GLC) with one unit.
For spinning or weaving, the installed capacity of the spinning/weaving units in Côte d’Ivoire is 26,000 tonnes per year. It is held by three (3) companies located in Bouaké, Dimbokro and Agboville. They are: Fillature Tissage de Gonfreville (FTG), UTEXI-CI, which has two (02) plants (Dimbokro and Agboville), and COTIVO.
Two companies operate in textile finishing and are located in Bouaké and Abidjan, with a total capacity of 35 million metres of fabric per year. They are: TEX-CI, located in Bouaké, and UNIWAX, located in Abidjan.
The Ivorian oilseed crushing sector has two modern units, one medium-sized unit and small semi-artisanal cottonseed crushing units, with a total installed capacity of 345,000 tonnes of cottonseed. They are: OLHEOL in Bouaké, COTRAF in Korhogo, HCI (Huilerie de Côte d’Ivoire) in Bouaké and APMUT (Association des Petites et Moyennes Unités de Trituration).
Finally, the garment-making sector is made up mostly of textile and fashion artisans, with more than 50,000 artisans and 15 industrial production units.
Cottonseed production
| SEASONS | 2015-2016 | 2016-2017 | 2017-2018 | 2018-2019 | 2019-2020 | 2020-2021 |
Seed production of cotton (tonnes) | 153 614 | 164 000 | 206 323 | 231 663 | 229 131 | 280 903 |
| Deliveries of cottonseed to the local crushing industry (tonnes) | 46 585 | 44 100 | 60 500 | 34 708 | 61 511 | 99 936 |
Sources : Cotton and Cashew Council
Outlook
In the short term, the Government plans:
to implement the strategy and action plan for the development of the automotive industry (White Paper);
to implement the strategy to revive the cotton-textile sector;
to continue implementing the project to support the fight against counterfeiting and piracy (CNLC);
to continue the work to set up industrial clusters in the textile and clothing, construction materials, packaging, chemicals and plastics, pharmaceutical industry, and automotive assembly and spare-parts manufacturing sectors;
to adopt and implement the Project to support the industrial exploitation of inventions and innovations.
Growth rate of value added (in current francs) of the secondary sector from 2015 to 2024
2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | |
| Secondary sector | -13,6% | 9,6% | 1,1% | 2,9% | 23,2% | -1,9% | 18,8% | 14,3% | 8,6% | 8,1% |
| Mining | 15,8% | 1,9% | 6,1% | -17,4% | 46,0% | -5,4% | 7,8% | 49,9% | 7,3% | 8,2% |
| Agri-food industries | 6,7% | 21,7% | 0,7% | 1,0% | 9,1% | -0,4% | 14,7% | 3,3% | 8,1% | 4,2% |
| Petroleum products | -73,4% | 120,5% | -35,8% | 97,3% | 71,6% | -17,2% | 87,5% | -18,0% | 1,3% | 19,3% |
| Energy (gas, electricity) | -46,5% | 33,0% | -16,1% | 63,4% | 24,0% | -10,8% | 18,6% | 3,7% | 8,5% | 5,7% |
| Construction and public works – BTP | -28,5% | -6,2% | 19,3% | -4,3% | 21,7% | -2,4% | 12,9% | 22,7% | -1,9% | 3,8% |
| Other manufacturing industries | -2,8% | 0,8% | -5,2% | 3,0% | 19,0% | 7,5% | 16,6% | 16,7% | 21,6% | 12,1% |
Sources : MEPD/DGE
Share of the secondary sector in GDP from 2015 to 2024
2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | |
| Secondary sector | 20,1% | 20,8% | 19,8% | 19,1% | 21,6% | 20,7% | 22,1% | 23,0% | 22,9% | 22,7% |
| Mining | 3,3% | 3,2% | 3,2% | 2,5% | 3,3% | 3,0% | 2,9% | 4,0% | 4,0% | 3,9% |
| Agri-food industries | 5,8% | 6,7% | 6,3% | 6,0% | 6,0% | 5,8% | 6,0% | 5,7% | 5,6% | 5,4% |
| Petroleum products | 0,5% | 1,0% | 0,6% | 1,1% | 1,7% | 1,4% | 2,3% | 1,7% | 1,6% | 1,7% |
| Energy (gas, electricity) | 0,9% | 1,1% | 0,9% | 1,3% | 1,5% | 1,3% | 1,4% | 1,3% | 1,3% | 1,3% |
| Construction and public works – BTP | 4,5% | 4,0% | 4,5% | 4,0% | 4,5% | 4,3% | 4,3% | 4,9% | 4,4% | 4,2% |
| Other manufacturing industries | 5,2% | 4,9% | 4,4% | 4,2% | 4,6% | 4,9% | 5,1% | 5,4% | 6,0% | 6,2% |
Sources : MEPD/DGE